Not getting internet connection even after connecting to the host TP Link extender? Are you facing no network access? Well, a few reasons are there why you might not be getting internet access. This article will help you resolve the issue you are facing. So, without further delay, let’s get through the following points. Read on.
Solution: No Network Access on Extender Connection
Confirm Connect With Router
The chances might be that your TP Link extender is not connected to the internet. On the off chance, the connection might not be that strong. Or, the connection between the devices might be fluctuating. In short, the range extender is not getting proper internet.
Therefore, we suggest that you should strengthen the connection between the TP Link range extender and the host router. Connect the Ethernet cable to have a stable and consistent internet supply.
Check IP Address
Same IP conflict is pretty common. It means two or more devices share the same IP address. In that case, neither of the concerned devices will get an internet connection. Hence, the reason for no network access when you connect to the TP Link extender connection could be an IP conflict.
We advise you to do the TP Link extender login and check its IP. If that does not work, check the router IP as well. Furthermore, you should check your connected device’s IP as well to resolve no network access issue.
There might be errors in the DNS. These contain cache files that might contain viruses or malware. Therefore, overloaded cached files might lead to no network access. Hence, you need to flush the DNS.
To do that, turn to your PC and type ‘cmd’ in the start menu and enter ipconfig/flushdns in the Command Prompt. After entering the information, hit the Enter key.
Run Speed Tests
Do you know whether you have a stable internet connection from the back end? No? Your first step should be to run a speed test. It helps you know whether the internet connection from the backend is stable.
If the speed is below the minimum, you are going to face no network access issues. For better understanding, you need to get in touch with your ISP.
Add Mac Address
Are you sure you have access to the TP Link WiFi network? Is your device’s Mac address added to the network? You must check that by logging into your TP Link extender app. It helps you know whether your device has permission to access the internet after connecting to the extender WiFi network.
If the Mac address is not added, you must manually add it. It will help you access the internet once your device connects to the TP Link extender connection.
TP Link WiFi extender is a connecting device that always stays connected to the internet. It could be an invitation to errors, viruses, malware, or even technical glitches. Hence, even when everything goes right, you might face no network access after getting connected to the TP Link extender connection.
So, we recommend you reboot your extender and the host router. But first, disconnect devices connected to both the connecting devices. After that, unplug the devices one by one and put them off the grid. After a few minutes, re-plug and reconnect the devices. It might resolve the network access issue.
Reset the Extender
The issue is still there? Still facing no network access? Well, the last resort is to go for a TP Link extender reset. Locate the reset button on your device and press it until your device resets. It is one of the best TP Link troubleshooting tips that you can follow.
However, make sure you use it only when nothing else works. It is going to remove and erase all the custom settings on your device.
We hope the above-given tips have helped you resolve no network access when you connect to the TP Link extender connection. Furthermore, an outdated firmware version could be behind the issue you are facing. So, make sure your range extender is updated all the time. Once the issue is resolved, you can enjoy a faster internet connection. Let us know in the comment section which troubleshooting tip helped you get internet access through an extender connection.